Please Click Here To View The Video

                   Standing Seam Roll Forming Machine

Profile Drawing

Material

Effective Width: 65mm                                     Effective Width Tolerance: -2/+5mm 

The Length Of Tolerance: ±0.5mm                  Inspection Thickness: 2.0mm         

Cold Roll Steel(CRC)                                          Material Yield Strength: Q235 

Applicable Material: The Plate of Aluminum Magnesium Manganese / Color Coating      

Material Thickness (The Plate of Aluminum Magnesium Manganese /Color Coating): 0.7-1.2mm/ 0.4-0.7mm   

Work Flow

Decoiler → Feeding  Device → Roll Forming System → Hydraulic Post Cutter (The knife of three pieces self-blanking)

 → Exit Rack*3 → PLC Control System  → Hydraulic Station

Machine Components

1) Decoiler: one set

Manual control steel coil inner bore shrinkage and stop
Max. feeding width: 590/620mm
Coil ID Range: 508±30mm
Max capacity: 3ton

2) Feeding Material Device

3) Roll Forming Machine

Body frame made from H400 type steel by welding
Side wall thickness: Q235 t16mm ; Tie rod:ф22 Galvanized
Rollers manufactured from Bearing steel GCr40, heat treatment HRC58-62 Degree
Shafts manufactured from 45# steel, Quenching and tempering, hard chrome plating. 

Diameter=φ75mm, precision machined 

Gear & chain drive about 13-step to form
Main Motor=7.5KW, Frequency speed control
Speed reducer motor: R series
Chain: Huade 
All the screw bolts with grade 8.8 (cheap factories use low grade 4.8) to ensure fix the machine structure tightly and long life during the machine long time running.
Product speed:15-20m/min (Including punching and cutting time)

4) Hydraulic Post Cutter（three pieces type of cutting blade)

Post to cut, stop to cutting,Three pieces type of cutting blade design, no blanking

Hydraulic motor: 2.2KW; Cutting pressure: 0-12Mpa;

The cutting power is provided by the independent engine hydraulic station(Look Below)

5) Exit Rack*3 

6) PLC Control System

Control The Quantity And Cutting Length Automatically
Input The Production Data(Production Batch,pcs,Length,etc.) On The Touch Screen ,
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, Touch Screen, Encoder, etc

PLC Control Interface

7) Hydraulic Station

8) Product Show

After-sale Service 

1. The warranty is 24 months after the client receives the machine.
   Within the 24 months, we will courier the replacement parts to the client free of charge
2. We offer technical support for the entire life of our machines
3. We can send our technicians to install and train the workers in the clients' factories with 
extra cost 

Packing Method

Main body of machine is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.